| | | |
| CMOS devices physics and SPICE Modeling for VLSI（已过期） |
课程编号：29684 |
|
|
| 上课时间： |
从 2008-05-24 09:30 到 2008-05-25 16:30 |
| 课程时长： |
12 小时 |
| 市 场 价： |
1200 元 |
| 淘 课 价： |
1200 元
（在淘课网用现金采购此课程，即获 1,800 淘币） 淘币细则 | 淘币换好礼
|
| 淘币兑换： |
120,000 淘币
（若您有足够淘币，您也可以用淘币兑换此课程） 如何获取淘币
|
| 开课地点： |
上海市
上海浦东新区张江高科技园区碧波路500号 |
| 人 气： |
33
发表评价
|
|
| 课程类别： |
个人技能 其它 |
|
|
|
电话咨询开课机构
报名热线： 021-61505199
培训受众
Current practicing IC design engineers with knowledge in Process and Device Physics and at least one year in IC design.
课程收益
The class is designed for IC designers, especially for analog mixed signal IC designer, to understand the SPICE model from its basic parameters to how they are generated and how to effectively use of SPICE model in simulation. This class covers the models of DIODE, BJT(G/P), MOSFET(BSIM3/4), RESISOR, CAPACITOR and other components. It studies in detail the large signal DC models and charge conservation AC models. In addition it also covers the corner modeling, Monte Carlo modeling and mismatch modeling and the usage in simulation. The topic of QA of the models is included. Thru the intensive review of process and device physics, student will gain better insight into the SPICE models and is enabled for the better IC design.
课程内容
1.Review of SPICE model Developments
1.0 Overview of CMOS process and device components.
1.1 SPICE modeling history and current development in industry.
1.2 Overview of current SPICE simulators and simulation flows widely used design community.
2. SPICE model (1): DIODE
2.1PN Junction fabrication, Device physics & operation.
2.2DIODE Model: DC model and AC model.
2.3DIODE SPICE model parameter extraction and simulation example.
3. SPICE model (2): MOSFET
3.1MOSFET fabrication, device physics and operation
3.2MOSFET Model: DC model and AC charge conservation model
3.3MOSFET noise modeling
3.5MOSFET BSIM3/4 SPICE model parameter extraction
3.6MOSFET models review: EKV, MOS9, PSP
4. SPICE model (3): Bipolar Transistor
4.1BJT fabrication, device and operation
4.2BJT Model: DC model and AC model
4.3BJT Gamma-Poon model parameters extraction and simulation example.
5.SPICE model (4): RESISTOR
5.1Resistors fabrication and modeling
5.2Review of Well, diffusion, poly, and metal resistors
6. SPICE model (5): CAPACITOR
6.1Capacitor fabrication, operation & modeling
6.2Review of poly, MIM, MOSFET, Junction and Varactor capacitance
7.SPICE model (5): INDUCTOR
7.1Inductor fabrication, operation and modeling
8.Effects and Modeling of Process Variation and Device Mismatching
8.1Modeling of process variation
8.2Modeling of Device Mismatch
9.Quality Assurance of the SPICE models
讲师介绍
Education:
Ph. D in Electrical Engineering
University of Central Florida, USA
BSEE & MSEE in Electrical Engineering
Mississippi State University, USA
Experience:
Director of Logic Technology Development in a Foundry Service
Manager of RFCD (RF Capability Development) for Intel Corp. USA
Sr. Engineer, Analog Circuit Design for Flash Group, Intel Corp. USA.
Sr. Engineer, Device Modeling for CTM, Intel Corp. USA.
Sr. Engineer, Device Modeling for Mixed Signal Group. Exar Corp. USA
Sr. Engineer, Device Modeling for Power Device Group. Siliconix, USA
Instructor of E.E. Department for UCF
Instructor of FXMC
Specializations：
1.Device characterization and model parameter extraction for logic, MS, and RF devices.
2.Analog/MS/RF design flow development and CAD support.
3.Analog circuit design
4.Over 50 technical publications in the area of SPICE modeling, HCI, and design flow development.
5.Hold 1 U. S. patent with 1 US patent and 8 China patents currently under review.
|
|